Powder Flame Spray Gun

In powder flame spray gun, the spray material in powder form is melted or fused in an oxy-acetylene flame and propelled onto the prepared workpiece surface with the help of expanding combustion gases. If necessary, an additional gas (e.g. nitrogen) are often used to accelerate the powder particles. A powder-feed sand blasting nozzle is located within the center of the flame spray gun. The range of spray powders available is enormous, comprising well over 350 different kinds. Powders are classified as self-fluxing and self-adhering. Self-fluxing powders normally require additional thermal post-treatment. In most cases, this “fusing” step is applied using oxy-acetylene torches, which are extremely well-suited to the present task.

The adhesion of the spray coating to the bottom material is greatly enhanced by the heat treatment, rendering it impervious to gases and liquids. This substance does not come into direct contact with the oxy-acetylene flame. This is surrounded by two ring-shaped nozzle outlets, the inner ring being for air or inert gas, and the outer ring for the thermal energy source, i.e. the oxy-acetylene flame.

The element is therefore not melted directly by the flame, but by the heated air and radiation heat. The mobility of flame spraying with powder, e.g. its use on-site, makes it frequently accomplished in its application.

Properties of Coating Powders

When a substance is a flame-sprayed, new and complex material is produced. This is the reason that the quality of the thermal spray gun coating depends upon the quality of the powder. A small variation in the powder can greatly affect the property of the last layer. The particle size distribution in a powder can change the density plus porosity of the coating. Then, Powder meets the best examples of chemical composition, particle shape & size, flow rate & purity.

Applications of Powder Flame Spray Gun

• Repairing damaged surfaces.
• Temperature/oxidation protection.
• Production of functionally graded materials (for either of the above applications).

Industrial Uses

• Automotive.
• Oil and Gas.
• Paper and Printing.
• Aerospace.

Powder Flame Spray Gun Manufacturers in India

We are a manufacturer of Powder Flame Spray Gun, Flame Spray Guns, Wire Flame Spray Guns, Metal Spray Gun, Thermal Spray Gun, and Zinc Spray Gun. Apart from standardized models, Dustless blasting machine manufacturer custom-built guns as per consumer requirements. The products are thoroughly tested by the quality department & rigorous development is achieved by a qualified design team in bringing new concepts. We are the Largest Manufacturer of Powder Flame Spray Gun.

Powder Flame Spray Gun Price in India

Dustless blasting machine is offering blasting machines and products at a low price. Powder Flame Spray Gun with or without remote control is available here at very low price. Along with this arc spray gun electric drive, steel grit, grit blasting machine, thermal spray robot, sand blasting machine, plastic abrasive media, axial flow fan, air breather, grit blasting machine, spray booth, blast room system and are also available at affordable prices.

Contact us today for latest Powder Flame Spray Gun Price in India.